Determining Toe In/Toe Out - Invacare A-4 User Manual
Hide thumbs
Also See for A-4:
- Owner's operator and maintenance manual (76 pages) ,
- Parts catalog (72 pages) ,
- Owner's manual (60 pages)
Table of Contents
Advertisement
SIDE VIEW OF QUICK
RELEASE LEVER
Quick Release
Lever
Open Position
7.6
Determining Toe In/Toe Out.
1.
Inflate all pneumatic tires to recommended tire pressures (listed on the sidewall of the tire).
2.
Measure the distance between the rear of the rear wheels and front of the rear wheels at the centerline of the rear wheels.
For optimum accuracy, perform STEP 2 with the wheelchair occupied.
3.
Determine the difference between the two measurements. If the difference between the two measurements is not within +
conditions exists:
A.
If the back centerline measurement of the rear wheels is smaller than the front centerline measurement of the rear wheels, a toe-out
condition exists.
B.
If the back centerline measurement of the rear wheels is larger than the front centerline measurement of the rear wheels, a toe-in condition
exists.
Part No 1110545
SIDE VIEW OF STANDARD
Camber Clamp
Socket Screw
Closed Position
FIGURE 5 Opening/Closing Camber Clamps
CAMBER CLAMP
Camber Clamp
47
REAR VIEW OF SUSPENSION
CAMBER CLAMP
Axle Tube
Camber Clamp
Hex Screw
1
/
inch, one of two
8
Invacare® A-4® Wheelchair
7 FRAME
Camber Insert
Advertisement
Table of Contents
