Invacare A-4 User Manual page 50

7 FRAME
9° or 12° Camber
1. Open the camber clamps. Refer to Opening/Closing Camber Clamps on page 46.
2. Slowly rotate the axle tube until the tab on the RIGHT toe adjustment ring is stopped against the UPPER edge of the camber clamp (FIGURE 7).
3. Close the camber clamps. Refer to Opening/Closing Camber Clamps on page 46.
AXLE TUBE POSITIONING FOR 0°/3°, 0°/6°, 3°/6° or 9°/12° CAMBER INSERTS
Left Tab Stopped Against Lower
Edge Of Camber Clamp
Axle Tube (Locked Out By Toe Adjustment Rings And Will Not Rotate)
Invacare® A-4® Wheelchair
- no adjustment required -
Left Toe
Adjustment Ring
Right Toe
Adjustment Ring
FIGURE 7 Adjusting Toe In/Toe Out
50
Right Tab Stopped Against Upper
Edge Of Camber Clamp
Part No 1110545