Suspension And Resumption Of Re-Keying Operations - Brocade Communications Systems Brocade 8/12c Administrator's Manual

Supporting hp secure key manager (skm) environments and hp enterprise secure key manager (eskm) environments
Hide thumbs Also See for Brocade 8/12c:
Table of Contents

Advertisement

5. Check the status of the re-keying session.

Suspension and resumption of re-keying operations

A re-key may be suspended or fail to start for several reasons:
After all errors have been corrected, you have two recovery options:
Fabric OS Encryption Administrator's Guide
53-1002159-03
FabricAdmin:switch> cryptocfg --show -rekey -all
Number of rekey session(s):
Container name:
EE node:
EE slot:
Target:
Target PID:
VT:
VT PID:
Host:
Host PID:
VI:
VI PID:
LUN number:
LUN serial number:
600601603FE2120014FC89130295DF1100010000000000000008000000000000
Rekey session number:
Percentage complete:
Rekey state:
Rekey role:
Block size:
Number of blocks:
Current LBA:
Operation succeeded.
The LUN goes offline or the encryption switch fails and reboots. Re-key operations are resumed
automatically when the target comes back online or the switch comes back up. You cannot
abort an in-progress re-key operation.
An unrecoverable error is encountered on the LUN and the in-progress re-key operation halts.
The following LUN errors are considered unrecoverable:
SenseKey: 0x3 - Medium Error.
SenseKey: 0x4 - Hardware Error.
SenseKey: 0x7 - Data Protect.
An unrecoverable error is encountered during the re-key initialization phase. The re-key
operation does not begin and a CRITICAL error is logged. All host I/O comes to a halt. All cluster
members are notified.
For any unrecoverable errors that may occur during any other phase of the process, the re-key
operation is suspended at that point and a CRITICAL error is logged. All cluster members are
notified. Host I/O to all regions of the LUN is halted. Only READ operations are supported for
the scratch space region of the LUN used for storing the status block of the re-key operation.
Resume the suspended re-key session. All DEK cluster or HA cluster members must be online
and reachable for this command to succeed. If successful, this command resumes the re-key
sessions from the point where it was interrupted.
1
cx320-157A
10:00:00:05:1e:40:4c:00
9
50:06:01:60:30:20:db:34 50:06:01:60:b0:20:db:34
022900
20:00:00:05:1e:53:8d:cd 20:01:00:05:1e:53:8d:cd
06c001
10:00:00:00:c9:56:e4:7b 20:00:00:00:c9:56:e4:7b
066000
20:02:00:05:1e:53:8d:cd 20:03:00:05:1e:53:8d:cd
06c201
0x1
0
23
Write Phase
Primary/Active
512
2097152
488577
3
Data re-keying
173

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fabric os encryption

Table of Contents