Brocade Communications Systems Brocade 8/12c Administrator's Manual page 87

FIGURE 55
9. Select the LUN from LUN list.
10. Set the LUN state to Encrypted or Clear Text as required.
11. Click Add or Apply to apply the modifications.
12. Click OK to commit the transaction.
NOTE
If the LUN state is not showing correctly (for example, Not Ready), enter the cryptocfg
command from the CLI and it should help resolve the issue. When the command finishes, refresh
the screen to check the new status of LUNs.
Fabric OS Encryption Administrator's Guide
53-1002159-03
Correcting an Encryption Mode mismatch
If the LUN already has an existing key ID, the State field is automatically set to Encrypted. You
can accept this state or change it as desired.
If the LUN does not have an existing key ID, you must select the LUN state.
When you correct a policy on a LUN, it is automatically selected for all paths to the selected
LUN. When you modify LUN policies, a Modify icon appears to identify the modified LUN entry.
Adding target disk LUNs for encryption
2
discoverLUN
--
67