Brocade Communications Systems Brocade 8/12c Administrator's Manual page 61

8. Click Next.
FIGURE 24
9. Select SKM as the Key Vault Type, which is used for both HP Secure Key Manager (SKM) and
10. Click Next.
Fabric OS Encryption Administrator's Guide
53-1002159-03
If the name for the encryption group already exists, a pop-up warning message displays.
Although unique group names avoid confusion while managing multiple groups, you are not
prevented from using duplicate group names. Click Yes to use the same name for the new
encryption group, or click No to enter another name.
The Select Key Vault dialog box displays.
Select Key Vault dialog box for SKM/ESKM
HP Enterprise Secure Key Manager (ESKM). (SKM and ESKM are both opaque key
repositories.)
a. Enter the IP address or host name for the primary key vault.
b. Enter the name of the file that holds the primary key vault's CA key certificate or browse to
the desired location.
c. Enter the password you established for the Brocade user group.
d. If you are using a backup key vault, also enter the IP address or host name and the name
of the file holding the backup key vault's public key certificate in the fields provided. The
same user name and password used for the primary key vault are automatically applied to
the backup key vault.
The Specify Public Key Certificate File Name dialog box displays.
Creating a new encryption group
2
41