FIGURE 77
For related information, refer to the following topics:
•
•
Viewing the progress of manual re-key operations
To monitor the progress of manual re-key operations, complete these steps:
1. Select Configure > Encryption from the menu task bar.
1. Select an encryption group from the Encryption Center Devices table, then select Group >
2. Click Refresh periodically to update the display.
Fabric OS Encryption Administrator's Guide
53-1002159-03
Pending manual re-key operations
"Re-keying all disk LUNs manually"
"Viewing the progress of manual re-key operations"
The Encryption Center dialog box displays.
Re-Key Sessions from the menu task bar, or right-click an encryption group and select Re-Key
Sessions.
The Re-Key Sessions Status dialog box displays. The dialog box lists the status of each LUN
that is being re-keyed.
Re-keying all disk LUNs manually
on page 91
on page 93
2
93