Removing Stale Rekey Information For A Lun - Brocade Communications Systems Brocade 8/12c Administrator's Manual
Supporting hp secure key manager (skm) environments and hp enterprise secure key manager (eskm) environments
Hide thumbs
Also See for Brocade 8/12c:
- User manual (1301 pages) ,
- Command reference manual (1132 pages) ,
- Reference (362 pages)
Table of Contents
Advertisement
Removing stale rekey information for a LUN
To clean up stale rekey information for a LUN, complete one of the following procedures:
Procedure 1:
1. Modify the LUN policy from "encrypt" to "cleartext" and commit. The LUN will become disabled.
2. Enable the LUN using the following command:
2. Modify the LUN policy from "cleartext" to "encrypt" with the enable_encexistingdata command
Procedure 2:
1. Remove the LUN from the Crypto Target Container and commit.
2. Add the LUN back to the Crypto Target Container with LUN State="clear-text", policy="encrypt"
and "enable_encexistingdata" set for enabling the first-time encryption, then commit. This will
clear the stale rekey metadata on the LUN and the LUN can be used again for encryption.
Fabric OS Encryption Administrator's Guide
53-1002159-03
cryptocfg --enable –LUN
to enable the first-time encryption, then commit. This will clear the stale rekey metadata on the
LUN and the LUN can be used again for encryption.
Removing stale rekey information for a LUN
6
247
Advertisement
Table of Contents
Troubleshooting
