Creating An Skm Or Eskm High Availability Cluster; Copying The Local Ca Certificate - Brocade Communications Systems Brocade 8/12c Administrator's Manual

3
Steps for connecting to an SKM or ESKM appliance
5. Configure the KMS Server Settings. Ensure that the port and connection timeout settings are
6. Click Save.

Creating an SKM or ESKM high availability cluster

The HP SKM/ESKM key vault supports clustering of HP SKM/ESKM appliances for high availability.
If two SKM/ESKM key vaults are configured, they must be clustered. If only a single SKM/ESKM
appliance is configured, it may be clustered for backup purposes, but the backup appliance will not
be directly used by the switch. The procedures in this section will establish a cluster configuration
on one SKM/ESKM appliance and then transfer that configuration to the remaining appliances.
•
•
•
To create a cluster, perform the following steps on one of the HP SKM/ESKM appliances that is to
be a member of the cluster.
1. From the SKM/ESKM management console, click the Device tab.
2. In the Device Configuration menu, click Cluster.
3. Select and note the Local IP address. You will need this address when you add an appliance to
4. For Local Port, use the default value of 9001 unless you are explicitly directed to use a
5. Type the cluster password in the Create Cluster section of the main window to create the new
6. Click the Create button.
7.

Copying the local CA certificate

Before adding an SKM/ESKM appliance to a cluster, you must obtain the local CA certificate from
the original SKM/ESKM or from an SKM/ESKM that is already in the cluster.
1. Select the Security tab.
2. Select Local CAs under Certificates & CAs.
3. Select the name of the local CA from the Local Certificate Authority list.
124
9000 and 3600, respectively. For Server Certificate, select the name of the certificate you
created in "Creating and installing the SKM or ESKM server certificate"
Create the cluster on one SKM/ESKM appliance that is to be a member of the cluster.
Copy the local CA certificate from the first SKM/ESKM appliance or an existing cluster
member.
Paste the local CA certificate it into the management console for each of the SKM/ESKM
appliances added to the cluster.
The Create Cluster section displays.
the cluster.
different value for your site.
cluster.
In the Cluster Settings section of the window, click Download Cluster Key and save the key to a
convenient location, such as your computer's desktop. The cluster key is a text file and is only
required temporarily. It should be deleted from your computer's desktop after all SKM/ESKM
appliances have been added to the cluster.
The CA Certificate Information is displayed.
on page 122.
Fabric OS Encryption Administrator's Guide
53-1002159-03