Moving A Bes From One Eg To Another Eg In The Same Fabric - Brocade Communications Systems Brocade 8/12c Administrator's Manual

6

Moving a BES from one EG to another EG in the same fabric

2. Enter the following command to propagate the change throughout the EG:
3. Remove the blade from DCX1, slot 4 and plug into DCX2, slot 3.
4. Add the moved blade as a member node to EG2.

Moving a BES from one EG to another EG in the same fabric

In this example, which is represented in
You want to move BES2 from EG1 to EG2.
TABLE 17
Encryption group
EG1
EG2
1. Enter the following command on BES1 to reclaim the VI/VT WWN base for the Brocade
2. Enter the following command to propagate the change throughout the EG:
3. Enter the following command in BES1 to eject node BES2 from the EG:
4. Enter the following command on BES1 to deregister the ejected node from the encryption
5. Enter the following command on BES2 to clean up the encryption configuration on the
6. Add BES2 as a member node to EG2.
246
cryptocfg --commit
Moving a Brocade Encryption Switch from one EG to another EG
Nodes (before move)
BES1 (GL)
BES2
BES3 (GL)
BES4
Encryption Switch to be moved out of EG1.
cryptocfg --reclaimWWN —membernode <BES1_WWN>
When prompted, answer yes.
cryptocfg --commit
cryptocfg --eject -membernode <BES2-WWN>
group:
cryptocfg --dereg -membernode <BES2-WWN>
deregistered node:
cryptocfg –-reclaimWWN –cleanup
When prompted, enter yes to each prompt.
Table 17, you have two EGs, each containing two nodes.
Nodes (after move)
BES1 (GL)
BES3 (GL)
BES4
BES2
Fabric OS Encryption Administrator's Guide
53-1002159-03