Brocade Communications Systems Brocade 8/12c Administrator's Manual page 79

FIGURE 44
5. Select the encryption engine (blade or switch) to configure, then click Next.
Fabric OS Encryption Administrator's Guide
53-1002159-03
Select Encryption Engine dialog box
The list of engines depends on the scope being viewed.
•
If the Targets dialog box is showing all targets in an encryption group, the list includes all
engines in the group.
•
If the Targets dialog box is showing all targets for a switch, the list includes all encryption
engines for the switch.
•
If the Targets dialog box is showing targets for a single encryption engine, the list contains
only that engine.
The Select Target dialog box displays. The dialog box lists all target ports and target nodes in
the same fabric as the encryption engine. The Targets in Fabric table does not show targets
that are already configured in an encryption group.
You can select targets from the list of known targets, or manually enter the port and node
WWNs.
Adding encryption targets
2
59