Entering System View From User View; Returning To The Upper-Level View From Any View; Returning To User View From Any Other View - HP 6125G Configuration Manual

view to configure login user attributes, or create a local user and enter local user view to configure
attributes for the local user.
To display all commands available in a view, enter a question mark (?) at the view prompt.
Figure 3 CLI view hierarchy

Entering system view from user view

Task
Enter system view from user view.

Returning to the upper-level view from any view

Task
Return to the upper-level view from any view.
Executing the quit command in user view terminates your connection to the device.
NOTE:
In public key code view, use the public-key-code end command to return to the upper-level view (public
key view). In public key view, use the peer-public-key end command to return to system view.

Returning to user view from any other view

You can return to user view from any other view by using the return command, instead of using the quit
command repeatedly. Pressing Ctrl+Z has the same effect.
To return to user view from any other view:
Command
system-view
Command
quit
3