Figure 10 Password authentication interface for console login
Configuring scheme authentication for console login
Follow these guidelines when you configure scheme authentication for console login:
To make the command authorization or command accounting function take effect, apply an
•
HWTACACS scheme to the intended ISP domain. This scheme must specify the IP address of the
authorization server and other authorization parameters.
If the local authentication scheme is used, use the authorization-attribute level level command in
•
local user view to set the user privilege level on the device.
If a RADIUS or HWTACACS authentication scheme is used, set the user privilege level on the
•
RADIUS or HWTACACS server.
To configure scheme authentication for console login:
Step
1.
Enter system view.
2.
Enter AUX user interface
view.
3.
Enable scheme
authentication.
Command
system-view
user-interface aux first-number
[ last-number ]
authentication-mode scheme
28
Remarks
N/A
N/A
Whether local, RADIUS, or
HWTACACS authentication is
adopted depends on the configured
AAA scheme.
By default, console log users are not
authenticated.