Step
1.
Enter system view.
2.
Enable copyright information
display.
3.
Enter one or multiple VTY user
interface views.
4.
Enable the terminal service.
5.
Enable the user interfaces to
support Telnet, SSH, or both of
them.
6.
Define a shortcut key for
terminating tasks.
7.
Configure the type of terminal
display.
8.
Set the maximum number of lines
to be displayed on a screen.
9.
Set the size of command history
buffer.
10.
Set the idle-timeout timer.
Command
system-view
copyright-info enable
user-interface vty first-number
[ last-number ]
shell
protocol inbound { all | ssh |
telnet }
escape-key { default |
character }
terminal type { ansi | vt100 }
screen-length screen-length
history-command max-size
value
idle-timeout minutes [ seconds ]
38
Remarks
N/A
By default, copyright information
display is enabled.
N/A
Optional.
By default, terminal service is
enabled.
Optional.
By default, both Telnet and SSH
are supported.
The configuration takes effect the
next time you log in.
Optional.
By default, press Ctrl+C to
terminate a task.
Optional.
By default, the terminal display
type is ANSI.
Optional.
By default, a screen displays 24
lines.
A value of 0 disables the function.
Optional.
By default, the buffer saves 10
history commands.
Optional.
The default idle-timeout is 10
minutes for all user interfaces.
The system automatically
terminates the user's connection if
there is no information interaction
between the device and the user
within the timeout time.
Setting idle-timeout to 0 disables
the timer.