Displaying And Maintaining Web Login; Http Login Configuration Example; Network Requirements - HP 6125G Configuration Manual

Fundamentals configuration guide
Hide thumbs Also See for 6125G:
Table of Contents

Advertisement

Step
6.
Associate the HTTPS
service with an ACL.
7.
Create a local user and
enter local user view.
8.
Configure a password for
the local user.
9.
Specify the command
level of the local user.
10.
Specify the Web service
type for the local user.
11.
Exit to system view.
12.
Create a VLAN interface
and enter its view.
13.
Assign an IP address and
subnet mask to the
interface.
For more information about SSL and PKI, see Security Configuration Guide.

Displaying and maintaining Web login

Task
Display information about Web
users.
Display HTTP state information.
Display HTTPS state information.

HTTP login configuration example

Network requirements

As shown in
Command
ip https acl acl-number
local-user user-name
password { cipher | simple }
password
authorization-attribute level level
service-type web
quit
interface vlan-interface
vlan-interface-id
ip address ip-address { mask |
mask-length }
Figure
27, configure the device to allow the PC to log in over the IP network by using HTTP.
Command
display web users [ | { begin |
exclude | include }
regular-expression ]
display ip http [ | { begin | exclude
| include } regular-expression ]
display ip https [ | { begin |
exclude | include }
regular-expression ]
57
Remarks
By default, the HTTPS service is not
associated with any ACL.
Associating the HTTPS service with an
ACL enables the device to allow only
clients permitted by the ACL to access
the device.
By default, no local user is configured.
By default, no password is configured
for the local user.
By default, no command level is
configured for the local user.
By default, no service type is configured
for the local user.
N/A
If the VLAN interface already exists, the
command enters its view.
You could replace this VLAN interface
with any other Layer 3 interface as
appropriate.
By default, no IP address is assigned to
the interface.
Remarks
Available in any view
Available in any view
Available in any view

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5500 hi series6125 blade switch series

Table of Contents