Configuration Procedure; Enabling Displaying The Copyright Statement - HP 6125G Configuration Manual

Command

Configuration procedure

To change the system time:
Step
1. Set the system time and date.
2. Enter system view.
3. Set the time zone.
4. Set a daylight saving time
scheme.

Enabling displaying the copyright statement

The device by default displays the copyright statement when a Telnet or SSH user logs in, or when a
console user quits user view. You can disable or enable the function as needed. The following is a sample
copyright statement:
******************************************************************************
* Copyright (c) 2010-2011 Hewlett-Packard Development Company, L.P.
* Without the owner's prior written consent,
* no decompiling or reverse-engineering shall be allowed.
******************************************************************************
To enable displaying the copyright statement:
Effective system time
date-time in the daylight
saving time range, but
date-time – summer-offset
outside the summer-time
range:
date-time – summer-offset
Both date-time and
date-time – summer-offset
in the daylight saving time
range:
date-time
Command
clock datetime time date
system-view
clock timezone zone-name { add |
minus } zone-offset
•
Set a non-recurring scheme:
clock summer-time zone-name
one-off start-time start-date
end-time end-date add-time
•
Set a recurring scheme:
clock summer-time zone-name
repeating start-time start-date
end-time end-date add-time
109
Configuration example
clock timezone
zone-time add 1
clock summer-time ss
one-off 1:00
2008/1/1 1:00
2008/8/8 2
clock datetime 1:30
2008/1/1
clock timezone
zone-time add 1
clock summer-time ss
one-off 1:00
2008/1/1 1:00
2008/8/8 2
clock datetime 3:00
2008/1/1
Remarks
Optional.
Available in user view.
N/A
Optional.
UTC time zone by default.
Optional.
Use either command.
By default, daylight saving time is
disabled, and the UTC time zone
applies.
System time
23:30:00 zone-time Mon
12/31/2007.
03:00:00 ss Tue
01/01/2008.
*
*
*