HP 6125G Configuration Manual page 51

NOTE:
The configuration commands and output vary by modem. For more information, see the modem user
guide.
To avoid data loss, verify that the speed of the console port is lower than the transmission rate of
5.
the modem, and the default parity check, stop bits, and data bits settings are used.
Launch the terminal emulation program and create a connection by using the telephone number of
6.
the modem connected to the device.
Figure 20 to Figure 23 shows the configuration procedure in Windows XP HyperTerminal.
Figure 20 Creating a connection
Figure 21 Configuring the dialing parameters
45