Switching To Another User Account; Maintaining And Troubleshooting The Ftp Connection; Terminating The Ftp Connection - HP 6125G Configuration Manual

Task
Query a directory or file on the
FTP server.
Delete the specified file on the
FTP server permanently.
Set the file transfer mode to
ASCII.
Set the file transfer mode to
binary.
Set the FTP operation mode to
passive.
Display the local working
directory of the FTP client.
Upload a file to the FTP server.
Download a file from the FTP
server.

Switching to another user account

After you log in to the FTP server with one user account, you can switch to another user account to get a
different privilege without reestablishing the FTP connection. You must correctly enter the new username
and password. A wrong username or password can cause the FTP connection to disconnect.
To switch to another user account:
Task
Change the username after FTP login.

Maintaining and troubleshooting the FTP connection

Task
Display the help information of
FTP-related commands on the FTP server.
Enable displaying detailed prompt
information received from the server.
Enable FTP related debugging when the
device acts as the FTP client.

Terminating the FTP connection

To terminate an FTP connection, perform one of the following tasks:
Command
ls [ remotefile [ localfile ] ]
delete remotefile
ascii
binary
passive
lcd
put localfile [ remotefile ]
get remotefile [ localfile ]
Command
remotehelp [ protocol-command ]
verbose
debugging
74
Remarks
The ls command displays the name of a
directory or file only, while the dir
command displays detailed information
such as the file size and creation time.
N/A
By default, ASCII mode is used.
By default, ASCII mode is used.
By default, passive mode is used
N/A
N/A
N/A
Command
user username [ password ]
Remarks
N/A
Enabled by default.
Disabled by default.