Table of Contents
Advertisement
CF5001 Ver.1.0 Sep. 2003
TONER SUPPLY
6.2.3
Copy/print operation stop control due to no toner
After the no-toner display is shown on the operation LCD, the consumption of about 50g of remaining toner
in the toner hopper is detected by the length of time during which the toner supply motor has been driven.
When it is determined by the length of time during which the toner supply motor has been driven that there
is no remaining toner in the toner hopper, the copy/print operation is stopped according to the setting of
DIPSW 1-2/1-3 of the 25 mode.
However, according to the setting of DIPSW 1-2/1-3 of the 25 mode, when the toner density in the develop-
ing unit is below the specified value while in the stop operation, the copy/print operation will stop immedi-
ately after paper in the machine is ejected.
2-35
Advertisement
Table of Contents
