Other Controls; Parts To Which Power Is Supplied Even When The Reset Switch Is Turned Off - Konica Minolta CF5001 Service Manual

CF5001 Ver.1.0 Sep. 2003

15. OTHER CONTROLS

15.1 Parts to which power is supplied even when the reset switch is
turned off
Regardless of the on/off position of the reset switch (SW1), the following components are supplied with
power so long as the power cord is plugged into the power outlet.
A. Circuit breakers /1 and /2 (CBR 1 and 2)
When more than a specified amount of current flows due to the short-circuit of internal parts, it turns off to
shut off the current to the machine.
B. Noise filter (NF)
This reduces the level of noise that enters through the power line.
C. AC drive board (ACDB)
This supplies AC power to each unit and turns on and off the fixing heater lamps and the heaters.
SW1
CBR1
NF
CBR2
ACDB
2-69
OTHER CONTROLS
8050ma2038