2Nd Transfer Control; Paper Exit Full Detection Control - Konica Minolta CF5001 Service Manual

CF5001 Ver.1.0 Sep. 2003
11.2.7

2nd transfer control

The paper that has been conveyed from the registration roller undergoes the 2nd transfer by the pressure
of the 2nd transfer roller /L on the transfer belt.
A. 2nd transfer roller /L pressure/release mechanism
[6]
[5]
[1] Release
[2] Pressure
[3] Transfer belt unit
B. 2nd transfer roller /L pressure/release operation
For timing of each operation of the 2nd transfer control, see "3. Drum unit section."
11.2.8

Paper exit full detection control

When the paper exit full sensor (PS12) is turned on and is kept in this condition during exiting a specified
number of papers or for a specified period of time, it is considered that the paper exit tray is full with paper
and a message is shown on the operational LCD.
[3]
[4]
[2]
2-59
REGISTRATION/ADU/REVERSE/PAPER EXIT
[1]
[4] Cam
[5] Pressure arm
[6] 2nd transfer roller /L
8050ma2036