Installing In Windows 3.1 - Epson Stylus COLOR 600 User Manual

6. After you have made your settings on the Details menu, click
Start, point to Programs and Epson, then click Spool
Manager4. The Spool Manager window opens.
7. Select your printer, click the Queue menu, then click Setup.
The Queue setup window opens.
8. Make sure the Use Print Manager for this port option is on;
it is on if the box contains a check mark. Then click OK.
Now you can use your printer on a network.

Installing in Windows 3.1

Follow these steps to install the software using Windows 3.1:
1. Make sure Windows 3.1 is running and the Program Manager
window is open.
2. Insert the EPSON printer software CD shipped with your
printer in the CD-ROM drive. (If you use the floppy disk
version, insert it in a disk drive.)
3. From the File menu, choose Run. You see the Run dialog box.
In the Command Line box, type D:\SETUP (If your
CD-ROM drive has a drive letter other than "D" or you are
using the floppy version, substitute the appropriate letter.)
2-18
Getting Started