1. Make sure the printer is connected to your Macintosh and is
turned on.
2. Choose Chooser from the Apple menu. Then click the
EPSON Stylus(EX) icon and the port your printer is
connected to.
Note:
If you don't see the EPSON Stylus(EX) icon, use the arrows on
the right to scroll through the available icons.
3. If your printer is connected to the Macintosh's printer port
and you are not using an AppleTalk network, make
AppleTalk inactive by clicking the Inactive radio button.
You may also need to restart your Macintosh to make
AppleTalk inactive.
You do not need to make AppleTalk inactive if the printer is
connected to the modem port.
c
Caution:
Do not make AppleTalk inactive if the Macintosh is
connected to an AppleTalk network.
2-25
Getting Started
2