Epson Stylus COLOR 600 User Manual page 137

The paper is old or creased.
The paper's size is not
compatible with the printer.
The printer loads more than one sheet at a time.
Cause
Too many sheets are loaded
in the sheet feeder.
The edge guides are not set
correctly.
The paper is too thin.
Ejected paper is wrinkled.
Cause
The paper is damp.
The paper is too thin.
Use only new, smooth sheets of paper.
Use paper that meets the paper
requirements for this printer. See
"Paper" in Appendix C.
What to do
Take the paper stack out of the feeder,
remove some sheets, and reload paper.
Before you load paper, check the
amount of paper you can load in the
sheet feeder. See Chapter 6.
Adjust the guides against the stack of
paper. See "Loading Paper" in
Chapter 3.
Make sure the paper meets the paper
requirements for this printer. See
"Paper" in Appendix C.
What to do
Do not store your paper in a damp or
humid environment. Store paper in its
original packaging.
Make sure the paper meets the paper
requirements for this printer. See
"Paper" in Appendix C.
Troubleshooting
8
8-15