Epson Stylus COLOR 600 User Manual page 135

Print speed is not what you expect.
Cause
The image resolution and the
amount of color used in the
document may be too high.
Something on the page is wrong or missing.
Cause
An unknown problem has
occurred.
The printer settings within
your application are
incorrect.
The interface cable is not
plugged in securely.
The print head moved to the ink cartridge replacement
position unexpectedly.
Cause
4
The cleaning button was
pressed while the or
was flashing or on.
What to do
Carefully considering your use of
color and resolution can help you
optimize your printing times. For
more details, see "Increasing the Print
Speed" later in this chapter.
Note:
High resolution printing and color
printing significantly increase the amount
of data to be processed. These two factors
have the greatest effect on print speed.
What to do
Disconnect the interface cable from the
computer; then try the printer
operation check described earlier in
this chapter.
Adjust the printer settings within your
application and print again.
Check that the cable is securely
connected to the printer and the
computer.
What to do
One or both of the ink cartridges is
light low or out of ink. Replace the ink
cartridges as described on page 7-2.
Troubleshooting
8
8-13