Epson Stylus COLOR 600 User Manual page 155

8. Press the ink cartridge clamp down until it locks in place.
The following illustration shows color ink replacement. For
black ink replacement, press down the smaller clamp on
the left.
c
Caution:
Once you install the cartridges, do not open their clamps
again until you replace the ink cartridges. Otherwise, the
cartridges may become unusable.
-
9. Press the load/eject button then close the printer cover.
The printer moves the print head and begins charging the
ink delivery system. This operation takes about two
minutes to complete.
When the ink charging process is finished, the printer
returns the print head to its home position and the
light stops flashing.
c
Caution:
The power light continues to flash while the printer
performs the ink charging operation. Never turn off the
printer while this light is flashing. Doing so can result in
incomplete charging of ink.
Even if you do not press the
moves the print head and begins the ink charging process
about 60 seconds after you replace the cartridge.
-
load/eject button, the printer
Troubleshooting
8
power
8-33