Installing In Windows 95 (Using Plug-And-Play) - Epson Stylus COLOR 600 User Manual

Note:
If you wish to make a floppy disk version of the printer software
included on your CD-ROM, click the Driver disk creation
utility button and follow the on-screen instructions.
3. Select your printer icon in the EPSON Printer Utility Setup
dialog box.
4. Make sure EPSON Stylus COLOR 600 is selected, and click
OK to start the printer software installation. Follow the
on-screen messages and when the installation is complete,
click OK again.
Your printer software is now installed. For information on
opening and using the software, see Chapter 3, "Printing With
Windows."

Installing in Windows 95 (using plug-and-play)

Follow these steps to install the printer software using
Windows 95 plug-and-play capabilities.
Note:
To install the printer software using Windows* 95 plug-and-play
capabilities, your computer's parallel port must be an IEEE 1284
compatible, bidirectional parallel port. See your computer
documentation for more information.
2-14
Getting Started