Epson Stylus COLOR 600 User Manual page 143

Colors are different than you expect.
Cause
The color print head nozzles
are clogged.
Black ink is selected in your
printer driver.
The paper is not loaded
printable side up.
The Media Type setting does
not match the paper loaded.
The ICM (Windows) or
ColorSync (Macintosh)
setting in your driver is not
appropriate for your
document.
Your printer and monitor are
not properly calibrated for
color matching.
Since monitors and printers
produce colors differently,
printed colors will not always
match on-screen colors
perfectly.
What to do
Clean the print head. See "Cleaning
the Print Head" later in this chapter.
Set the Ink setting to Color.
Check that the printable side of the
paper is facing up.
Change the Media Type setting in
your printer driver to match the type
of media you have loaded.
Load media that matches the Media
Type setting you selected in the
printer driver.
Select Automatic as the Mode setting
in the printer driver.
See the user's guides of your
image-editing software and your
monitor for information on calibrating
your system for color matching.
See Appendix B , "Tips for Color
Printing".
Troubleshooting
8
8-21