Installing In Windows 95 - Epson Stylus COLOR 600 User Manual

If you are using the floppy disk version of the software, before
you begin installation, make a backup copy of the EPSON
printer software disk. If you wish to make a floppy disk
version of the printer software on your CD-ROM, you can use
the driver disk creation utility included on the CD. See page
2-15 for Windows 95, or page 2-18 for Windows 3.1.

Installing in Windows 95

Follow the steps below to install the printer software in
Windows 95.
1. Make sure Windows 95 is running and the printer is off.
2. Insert the printer software CD shipped with your printer in
the CD-ROM drive. Click Install in the dialog box that
appears, shown below.
If this dialog box does not appear when you insert the printer
software CD, double-click the My Computer icon, then
double-click the CD-ROM drive icon (or floppy disk drive
icon if using the floppy disk version). If the dialog box
shown above still does not appear, double-click the
Setup.exe icon. You may need to use the arrows to scroll
through the folder to find it.
2-13
Getting Started
2