Installing The Software In Windows Me, 98, 95, 2000; Or Nt - Epson LX-1170 User Manual

Installing the software in Windows Me, 98, 95,

2000, or NT 4.0

Follow these steps to install the printer software in Windows Me,
98, 95, 2000, or NT 4.0:
Note:
Installing the printer software for Windows 2000 or NT 4.0 may
require administrator privileges. If you have problems, ask your
administrator for more information.
If you wish to make a floppy disk version of the printer software on
your CD-ROM, insert the CD-ROM and run the START.EXE
program. In the dialog box that appears, click the Driver disk
creation utility button and follow the on-screen instructions.
If you are using the floppy disk version of the EPSON software, make
a backup copy of the EPSON printer software disk or disks before
you begin installation.
1. Make sure that the printer and computer are switched off.
2. Switch the PC on. Windows starts automatically. Then switch
the printer on.
3. Insert the CD-ROM containing the printer software into the
CD-ROM drive. The AutoPlay function of the CD-ROM drive
automatically starts the installation program on the CD-ROM.
If the installation program does not start automatically, click
on Start and then on Run. In the Run dialog box, enter the
drive letter of your CD-ROM drive in the command line (e.g.
E:\), followed by the command START.EXE (e.g.
E:\START.EXE) and click on the OK button.
Note:
If your CD-ROM drive has a drive letter other than E, substitute
the appropriate letter.
Setting Up the Printer
1
1-19