Network; Basic - ATCOM at810 User Manual

AT810 Series User Manual
This page shows the current basic information of the IP phone like the product
information, network information and account information.
Product information: Shows the product name, protocol, software version, hardware
version, MAC address and serial number.
Network information: Shows the type of web connection, the current IP, the current
netmask, current gateway, primary DNS, secondary DNS, host name and the domain.
Account information: Shows the registration state, proxy, user id, the message waiting
status, last registration time and next registration time.

5.2 Network

5.2.1 Basic

There are 3 ways for AT810 series to connect to the internet: DHCP, Static and PPPoE,
please choose one according to the actual situation.
A. DHCP: the IP phone will get IP address from DHCP server, user do not have to fill in
the data of IP address, net mask etc. Just choose DHCP and submit.
B. Static IP: If the ISP provides user with the fixed IP address, please choose static and
fill in the correct information of IP Address, Net mask, Gateway, Primary DNS etc. If
user does not know them, please refer to the ISP provider or the network
management stuff.
Parameters:
1. IP Address: fixed IP address.
2. Subnet Mask: WAN net mask.
3. Default Gateway: Set Default gateway IP address.
4. Primary DNS: Set primary DNS address.
5. Secondary DNS: Set alternative DNS address.
C. PPPoE: When user want to use PPPoE, select "PPPoE"，and makes the phone's WAN
interface connected to the Ethernet interface of the modem, and then configures the
ATCOM TECHNOLOGY CO., LIMITED www.atcom.cn
21