Sip Setting; Sip Timer Values; Rtp Parameters - ATCOM at810 User Manual

AT810 Series User Manual
5.2.2.6. Syslog
A. Enable Syslog: Whether to enable syslog or not.
B. Log level: None，Alert，Critical，Error，Warning，Notice，Info，Debug. Debug level
is the most detailed.
C. Syslog Server: Syslog Server address, which is a domain name or an IP address.
D. Port: Syslog port, which usually is 514.

5.3 Sip Setting

5.3.1. Sip Timer Values

A. Sip T1: RFC 3261 T1 value (RTT Estimate). Range from 0 to 64. The default value is
0.5.
B. Sip T2: RFC 3261 T2 value (Maximum retransmit interval for non-INVITE requests
and INVITE responses). Range from 0 to 64. The default value is 4.
C. Sip T4: RFC 3261 T4 value (Maximum duration a message will remain in the
network). Range from 0 to 64. The default value is 5.
D. Reg Retry Intvl: Interval to wait before the phone retries registration again after
encountering a failure condition during last registration. Range from 0 to 65535.The
default value is 8.
E. Sub Retry Intvl: Subscribe message's re-sending interval after a failure. Range from
0 to 65535.The default value is 10.

5.3.2 RTP Parameters

ATCOM TECHNOLOGY CO., LIMITED www.atcom.cn
24