Nat Support Parameters; Account; Sip - ATCOM at810 User Manual

AT810 Series User Manual

5.3.4 NAT Support Parameters

A. Enable Stun: Whether to use stun to discover NAT mapping or not.
B. Stun Server: Stun server to contact for NAT mapping discovery.

5.4 Account

5.4.1 SIP

 Enable: Whether to enable this sip register or not.
 Display Name: The phone's display name, it will be shown on the far end when dialing.
It will prefer to show the name set by the server if the server has set a name for
account. It will show the account instead if set the display name as blank.
 User ID: Set user ID for sip account.
 Authenticate ID: Normally is the same with User ID, can also leave it as blank.
 Password: Set password for sip account.
ATCOM TECHNOLOGY CO., LIMITED www.atcom.cn
26