Power Up; Network Connection; Phone Configuration - ATCOM D2SW Series Quick Start Manual

D2SW/D3SW Series Quick Start Guide

3. Power up

3.1. Connect to DC 5V/0.6A power adapter
3.2. The status indicator will be on during power-on, and the Welcome dialog will appear on
the LCD.
3.3. After boot up finished, User can select the Language time zone manually and Wi-Fi.

4. Network Connection

4.1. Connect to LAN network
The phone from the LAN port to get the network
4.2. Connect to Wi-Fi network
Wi-Fi network card mode
Please press Menu→Wi-Fi Settings, select the Wi-Fi SSID and input the password, then
press the Connect button, the phone would connect the Wi-Fi and the LCD would show
the icon
4.3. Network Instruction
The phone enabled the Wi-Fi in default:
1) After plug into the network cable, the Wi-Fi will disable by automatically. (Noted: if
need use the Wi-Fi, please enable the Wi-Fi setting in manual)
2) Then the phone plug off the network cable, the Wi-Fi will connected by automatically

5. Phone Configuration

5.1. Configuration via WEB
5.1.1 Access the phone WEB via LAN port or Wi-Fi
7 / 9