Table of Contents
Advertisement
38
en | Maintenance and troubleshooting
6
Maintenance and troubleshooting
This section includes maintenance and troubleshooting information.
6.1
Firmware updates
You can send firmware updates through the USB interface. Use Tera Term. Update to the most
recent version on the module web page.
Sending a firmware update
1.
2.
3.
4.
Notice!
Once you press [Enter], the module begins a 90-second timer as it waits for the firmware
File>Transfer>XMODEM>Send process to begin. If the transfer process takes longer than 90
second to locate the file and begin the send process, the menu times out, and you must begin
the update process again.
5.
6.
2018.10 | 10 | F.01U.300.740
Make sure that the computer and the module are connected and can communicate.
Follow the instructions in USB configuration, page 22.
From Windows, start Tera Term.
Log into the USB interface. The B450 USB login window appears, listing the current
software version and build.
Select option 7 and press [Enter].
From the Tera Term main menu, select File>Transfer>XMODEM>Send.
In the XMODEM Send window, navigate to the folder location and select the firmware
update software you downloaded. The file ends in *.kfw extension.
Installation Manual
Conettix Plug-in Communicator
Bosch Security Systems, Inc.
Advertisement
Table of Contents
