Using View Log; Using Print Log; Using Display Revision - Bosch D1265 Owner's Manual

D1265 | Owner's Manual | Part III: Advanced Commands

Using View Log

1. Press the View Log button.
2. The display changes to Enter start date:
Press the Go to last event button to go to the
last event in the log.
Press the Exit button to exit this function and
return to idle text.
3. Enter the start date in the form of mm/dd.
For example, to enter 7/14 as the start date,
press 0 + 7 + 1 + 4
Once you start entering digits, the Go to last
event button is replaced with the ENTER
button.
Press the Exit button to exit this function and
return to idle text.
4. Press the ENTER button.
6. If the date entered is valid, the first event for
that date appears.
Press the Exit button to exit this function and
return to idle text.
If the date entered is invalid (there are no
events with that date in the log), it shows the
next latest event in the log.
Press the Exit button to exit this function and
return to idle text.
7. The display shows one of two ways depending
on if the date entered was for an event first in
the log or not.

If the date was for the first event in the log, it
shows the next latest event in the log.

If the date was for an event (not the first) in the
log, the display is the same except the Previous
button has been added.
Press the Exit button to exit this function and
return to idle text.
8. Press the Next button to go to the next event in
the log.
If there are no more events in the log, *End of
Log* appears.
Press the Previous button to go to the previous
event in the log.
Press the Exit button to exit this function and
return to idle text.
58

Using Print Log

1. Press the Print Log button.
2. The display changes to Enter start date:
Press the Print all events button to print all
events in the log.
Press the Exit button to exit this function and
return to idle text.
The events are sent to a connected printer and
display changes to Printing all events in
history for 3 sec before returning to idle text.
3. Enter the start date in the form of mm/dd.
For example, to enter 12/21 as the start date,
press 1 + 2 + 2 + 1.
Once you start entering digits, the Print all
events button is replaced with the ENTER
button.
Press the ENTER button.
4. If the date entered is valid, the events for that
date is sent to a connected printer and the
display shows Printing events. for 3 sec, before
returning to idle text.

Using Display Revision

1. Press the Display Revision button.
2. The display changes to show the revision
number.
3. The display returns to idle text after 5 sec.
Bosch Security Systems, Inc. | 9/10 | F01U169130-02