Bosch D1265 Owner's Manual page 52

D1265 | Owner's Manual | Part III: Advanced Commands
Add/Change Level
1. Pressing the Level button allows you to
add/change a user's authority level.
2. The display changes to User 3 Add Auth.
Level for this user.
Press the Yes button to add an Authority Level.
Press the No button to advance to Add/Change
Passcode (if the control panel does not have
access control) or to Change Sub-User ID (if the
control panel has access control).
Press the Exit button to exit from this menu
and return to the Level changed display (refer
to Step 6).
The display changes to Is this user authorized
in Area 1?. Press the Yes button to/add change
this user's authority level in Area 1.
Press the No button if the user isn't authorized
in Area 1 and proceed to display user's
authorization in Area 2.
Press the Exit button to exit from this menu
and return to the Level changed display.
If the user is authorized in Area 1, the display
changes to the User's current authority level: 15
for Area 1 (for example).
To change the Authority Level, enter a new
authority level (from 1 to 15), if desired, and
press the ENTER button.
Before determining the Authority Level for a
user, please consult your security company to
assist you in selecting the correct authority level.
Press the Exit button to exit from this menu
and return to the Level changed display.
3. Repeat Step 2 for each area through Area 8.
4. The display changes to User 3 Change this
user's Auth. Level
Press the Yes button to add/change this user's
authority level in Area 1.
52
Press the No button to advance to
Add/Change Passcode (if the control panel
does not have access control) or to Change Sub-
User ID (if the control panel has access control).
Press the Exit button to exit from this menu
and return to the Level changed display (refer
to Step 6).
If the user is authorized in Area 1, the display
changes to User's current authority level: 14
for Area 1.
(14 is used as an example here.)
To change the Authority Level, Enter a new
authority level (from 1 to 14), if desired, and
press the ENTER button.
Before determining the Authority Level for a
user, please consult your security company to
assist you in selecting the correct authority level.
Press the Exit button to exit from this menu
and return to the Level changed display.
5. Repeat Step 4 for each area through Area 8.
6. Once the user's authority level has been verified
for Area 8, the display changes to Level
.
changed
If the Next button is pressed, the display
changes to Add/Change Sub-User ID (if the
control panel has access control).or
Add/Change Passcode (for control panel
without access control).
If the Exit button is pressed, the display
changes to Add / Change User Enter User #:
Bosch Security Systems, Inc. | 9/10 | F01U169130-02