Turning Off Selected Areas - Bosch D1265 Owner's Manual

D1265 | Owner's Manual | Part IV: Multi-Area Use

Turning Off Selected Areas

If your passcode has the proper authority level this
function allows you to turn off areas other than the one
you are in.
1. The display initially shows that the system is
armed.
2. Press the Menu button to enter the function list.
3. Press the Next button repeatedly until you
reach the Disarm Menu button, and then press
it.
4. If entering through a door which is part of an
area that is armed, the display changes to show:
5. Enter your passcode and press ENTER.
The passcode is shown as asterisks (*) when
entered and advance from the right side of the
display to the left until all the passcode digits
are entered.
6. If the entered passcode is valid, the display
changes to show Disarm All.
7. Press the Next button to go to the first armed
area.
8. The display changes to show Disarm Area 1
(or the first area that is armed).
Press the Disarm button to disarm this area. A
confirmation of the areas disarmed status is
shown, and then the display advances to the
next armed area.
Press the Next button to scroll through the
remaining areas you have the authority to turn
off.
To disarm the area, press the Disarm button.
9. After turning off all armed areas or pressing the
Exit button, the keypad's display returns to the
idle text for the area you are in.
66 Bosch Security Systems, Inc. | 9/10 | F01U169130-02