Bosch D1265 Quick Manual

Intrusion Alarm Systems | D1265 Touch Screen Keypad
D1265 Touch Screen Keypad
www.boschsecurity.com
The D1265 Touch Screen Keypad is an SDI bus
compatible device that works with GV4/GV3/GV2
Series Control Panels. Each keypad has an illuminated
touch screen to display system messages and
graphical buttons for data or command entry, and a
sounder that emits eight warning tones.
Functions
Touch Screen Display
The D1265 keypad uses up to four rows of 20
characters each to display system messages and/or
graphical buttons used to select a menu and
associated functions. In addition to system messages
and graphical buttons, the keypad displays, as needed,
ten numeric butttons (0 to 9) and two function
buttons (CMD and ENTER). Use the COMMAND button
in combination with numeric buttons to perform a
function. Use the ENTER button to enter your
passcode.
When several events occur, the keypad shows each
event in order of priority.
Audible Tones
The sounder emits eight distinct warning tones. You
can adjust the volume. You can also use a passcode to
silence the tone.
Bright 480 by 272 TFT color graphic touch screen
u
display provides excellent visibility
Simple menu operation allows ease of use for novice
u
users and familiarity for experts
System instructions through Integrated on-screen
u
Help
Easy installation with self-locking base and chassis
u
design including integrated bubble level
Compatible with GV4, GV3, and GV2 Series Control
u
Panels
Certifications and approvals
The D1265 keypad is designed to comply with the
requirements of:
USA FCC Part 15
EC Directives RoHS Directive 2002/95/EC Restriction of
the use of certain Hazardous
Substances
WEEE Directive 2002/96/EC Waste
Electrical and Electronic Equipment
Installation/configuration notes
Compatibility Information
Control Panels D9412GV4, D7412GV4, D7212GV4,
D9412GV3, D7412GV3, D7212GV3,
D9412GV2, D7412GV2, D7212GV2,
Power Supplies
A compatible control panel supplies the power and
data requirements to a D1265 keypad through a
simple four-wire connection. To determine if an
additional power supply is needed, use the operation