View Faulted Or Bypassed Points; To Automatically Scroll Faulted Or Bypassed Points - Bosch Security System User Manual

View Faulted or Bypassed Points

To properly arm your system, all the exterior points (doors
and windows) and interior points (motion sensors, inside
doors, etc.) in the system must be in the normal (not faulted)
condition. Viewing the faulted points helps you find faulted
points (such as doors or windows that are left open) and
correct them so proper arming is possible.
Your keypad offers two ways of displaying faulted and
bypassed point information. The first causes the faulted or
bypassed point information to scroll automatically through the
display. The second allows you to manually scroll through
each individual point description.

To Automatically Scroll Faulted or Bypassed Points

1. Ensure your keypad shows idle text. The View Points>
soft key will be displayed on the third line of the keypad
when there are faulted points.
Bosch Security Systems | 9/04 | 4998122475D
Security System | User's Guide | Part I: Security System Basics - View Faulted or Bypassed Points
2. Press the digit key. The text for Area 1 is displayed first
followed by the number (#) of faulted points on the next
line.
Press the View Points> soft key to automatically scroll
through the faulted points.
3. The display changes to show the point text description of
the faulted points. If there is more than one faulted point,
the display will automatically cycle through all of them
before returning to idle text.
These displays scroll at the rate of three seconds per
faulted point.
4. If there are no faulted or bypassed points, the View
Points> soft key will not appear. Instead, the display
shows Area Is Off idle text.
5. The display returns to idle text after scrolling through the
faulted and bypassed point information.
14