Planar UltraLux Remote Monitoring
Planar UltraLux Remote Monitoring is software that displays information about the
LCD display via a web browser. It is used primarily for monitoring, reporting and
some control (for example, powering the displays on and off either manually or per a
pre-defined schedule).
Remote Monitoring Home
This is the first page you will see when you open the Planar UltraLux Remote
Monitoring software. Launch a web browser. If you are using DHCP, enter in the IP
address shown on the Info tab of UltraLux Remote Monitoring. If you are not using
DHCP, enter
you should see a page similar to the following.
in the address bar. For either web address entered,
http://192.168.12.12
Planar UltraLux Series Installation Guide
Planar UltraLux Remote Monitoring
43