Planar UltraLux Series Manual page 96

Installing the UltraLux on the Pedestal Mount
5
6
7
90
Route all cabling through the bottom of the pedestal mount or through both
sides of the mount. If you run cables through the sides of the mount, you can
punch out holes and install grommets through which to run the cables.
Install the UltraLux on the Planar Profile Mount that is already attached to the
pedestal mount. See "LCD Installation" on page 16 for more information.
See the following pages for detailed drawings of the pedestal mounts, anchor
points, etc.
Planar UltraLux Series Installation Guide