Snmp Monitoring - Planar UltraLux Series Manual

SNMP Monitoring

The current settings and status of UltraLux units can be remotely monitored using
SNMP (Simple Network Management Protocol), if the SNMP option is enabled
through the web browser settings. The MIB (Management Information Base) used for
all Planar display products is available by electronic distribution in the file
DISPLAY-MIB.txt
Planar SNMP objects are read-only, and no traps are used. The default read-only
community string for all Planar SNMP objects is "public". Once the PLANAR-DISPLAY-
MIB is loaded in your SNMP manager, you can walk all the available objects from the
top-level object PlanarSystems(1.3.6.1.4.1.19125) or its sub-object
PlanarDisplayProduct(1).
Most object values are integer type, except where noted. Generally, for integer types,
the value -1 is returned if there is any internal system or communication error, and
normal return values are zero or positive integers.
plnrModel
plnrInputSelect
plnrInputStatus
plnrDisplayBacklight
plnrDisplayBrightness
plnrDisplayContrast
plnrDisplaySharpness
plnrDisplayColorSpace
plnrDisplayColorTemp
plnrDisplayGainRed
plnrDisplayGainGreen
plnrDisplayGainBlue
plnrAudioVolume
plnrAudioMute
. The table below shows the objects that can be monitored – all
Object Name
Model name (string)
User-selected input source
Input source status
Backlight on/off state
User-selected brightness value
User-selected contrast value
User-selected sharpness value
User-selected color space
User-selected color temperature
User-selected red gain value
Note:
when color temperature
setting is 7 or user.
User-selected green gain value
User-selected blue gain value
User-selected volume setting
User-selected audio mute
Planar UltraLux Series Installation Guide
Description
Gain values apply only
RS232 Commands
Value
UltraLux
1 = HDMI, 2 = DisplayPort, 3 = VGA
0 = Source Absent, 1 = Source Present
1 = On, 0 = Off
0-100
0-100
0-8
0 = full color
2 = sRGB
2 = 4200K
3 = 5000K
4 = 6500K
5 = 7500K
6 = 9300K
7 = user
0-100
0-100
0-100
0-100
1 = On, 0 = Off
PLANAR-
35