Normal Use Thermal Guidelines - Planar UltraLux Series Manual

Hide thumbs Also See for UltraLux Series:

Table of Contents

Recommended Usage

Normal Use Thermal Guidelines

Normal use of the LCD module and power supply module are defined as operating in

the open air to prevent heat buildup, and without direct or indirect heat sources such

as lighting fixtures, heating ducts, or direct sunlight that can cause the modules to

experience high operating temperatures. For all modules, do not block fans or

ventilation openings. If the LCD module will be installed in a recessed area with an

LCD surround or enclosure, ensure adequate openings are applied for proper air flow

and ventilation.

At 2000 meters or below, the maximum ambient operating temperature for the LCD

module cannot be above 104º F (40º C) and 35º C for 80" portrait, nor below the

minimum ambient operating temperature of (32º F) 0º C. If one of these conditions

exists, it is up to the installer to ensure that module placement is changed, thermal

shielding is provided and/or additional ventilation is provided to keep the display

within its nominal operating parameters.

Cooling Requirements

For optimal performance, active cooling by the installer should be planned for when

the ambient temperature anywhere in the display is predicted to be above the

specified ambient temperature for the display.

Planar UltraLux Series Installation Guide

Table of Contents