Planar UltraLux Series Manual page 25

Hide thumbs Also See for UltraLux Series:

Table of Contents

Line up the middle hole of the top wall mount with the screw hole drilled from

the template.

Note:

This picture shows mounts for a landscape installation.

Tighten the screw into the mount.

Use a level to make sure the mount is level.

Then install additional screws as needed.

Note:

Screws installed near the mount hooks provide the best support.

Install the center screw in the bottom mount and repeat steps

additional screws that you want to install. Note that there are open mount

channels on the brackets. So you can install the screws wherever necessary along

those channels.

Planar UltraLux Series Installation Guide

Installing an UltraLux Display on a Wall

for any

Table of Contents