Reboot - Planar UltraLux Series Manual

Planar UltraLux Remote Monitoring
4
5
6
7

Reboot

Click Reboot now to reboot your system. This copies everything in flash memory to
RAM. RAM memory is used for all current operations. When power is applied to
Remote monitoring, flash memory is copied to RAM. Reboot takes about 90 seconds.
54
When you click Reset ALL to Factory Default, you receive the Confirm Factory
Reset page. Click OK, Reset to Factory Defaults and Reboot if you are sure you
want to reset ALL settings to the factory default.
The top of each page shows the Planar logo, which is a link to
http://www.planar.com
useful by typing it into the Product ID Link box.
To make this link live, click Change Product ID Link.
In normal operations, Remote Monitoring polls the displays at a rate of one per
second to look for user requests that have been made using the IR remote control
and the on-screen menus. In some situations, this polling can have a noticeable
performance impact. If you want to disable this polling, select the Disable
polling for alert conditions checkbox. When you are finished, click Change
Advanced Settings.
Planar UltraLux Series Installation Guide
. You can change this link to refer to any URL that you find