726
Users Manual
Figure 23. Calibrating a Chart Recorder
52
Remote Control Commands
The Calibrator may be remotely controlled from a PC
running a terminal emulator program. The remote control
commands give access to all capabilities of the Calibrator
with the exception of pressure measurement.
See the Fluke Web Site for the 726 Remote
Programming application note at
www.fluke.com/processtools
HART
The Calibrator has a user-selectable 250
facilitate use with HART communication devices. The
resistor can be switched in or out using config selection
menus. Use a HART communicator when measuring mA
with loop power or sourcing mA.
bec25f.eps
Functionality
HART to