Standard Equipment
If the Calibrator is damaged or something is missing,
contact the place of purchase immediately. To order
replacement parts, see Table 8. The items listed below
and shown in Figure 1 are included with the Calibrator.
TL75 test leads
AC72 alligator clips
Stackable alligator clip test leads
726 Product Overview (not shown in Figure 1)
725/726 CD-ROM (contains Users Manual; not
shown in Figure 1)
4 AA Batteries (installed)
Multifunction Process Calibrator
Safety Information
The Calibrator is designed in accordance with CAN/CSA-
C22.2 NO. 61010-1-04, UL 61010-1, and ISA 82.02.01
XW Warning
To avoid possible electric shock or personal
injury, use the Calibrator only as specified in
this manual, otherwise the protection
provided by the Calibrator may be impaired.
A Warning identifies conditions and actions that pose
hazard(s) to the user. A Caution identifies conditions and
actions that may damage the Calibrator or the equipment
under test.
Standard Equipment
3