Input/Output Terminals And Connectors - Fluke 726 User Manual

No Name
Pressure module
A
connector/serial connector
MEASURE V, mA terminals
B, C
Thermocouple (TC)
D
input/output
E, F
SOURCE/ MEASURE V,
RTD, Pulse, Hz,
SOURCE/ MEASURE mA
G, H
terminals, 3W, 4W
Table 3. Input/Output Terminals and Connectors
Connects the Calibrator to a pressure module or to a PC for a remote control
serial connection.
Input terminals for measuring voltage, current, supplying loop power, HART
resistance, switch test options.
Terminal for measuring or simulating thermocouples. This terminal accepts a
miniature polarized thermocouple plug with flat, in-line blades spaced 7.9 mm
(0.312 in) center to center.
Terminals for sourcing or measuring voltage, resistance, pulse, frequency, and
terminals
RTDs.
Terminals for sourcing and measuring current and performing 3 W and 4 W RTD
measurements. HART resistor option in mA mode.
Multifunction Process Calibrator
Getting Acquainted with the Calibrator
Description
9