726
Users Manual
Sourcing Other Electrical Parameters
Volts, ohms, and frequency are also sourced and shown
in the lower display.
To select an electrical sourcing function, proceed as
follows:
1.
Connect the test leads as shown in Figure 15,
depending on the source function.
M
2.
If necessary, press
32
for SOURCE mode.
V
3.
Press
for dc voltage, or
R for resistance.
4.
Enter the desired output value by pressing
W
Y
keys. Press
and
change.
K
for frequency, and
X
and
Z
to select a different digit to