Reinserting The Drive Cage - Gateway E3400 System Manual

Reinserting the drive cage

You can easily slide the drive cage back into the chassis.
To reinsert the drive cage:
1
With one hand, press the drive cage release button, then push the drive
cage back into the chassis with the other hand until the release button
snaps into the rear locking hole.
release button
2
Replace the right panel. (See "Replacing the side panels" on page 23 for
instructions.)
3
Reconnect the power cord and all other cords you removed, then turn
on the system.
Release button
rear locking hole
Drive cage
1
2
Replacing or adding drives
29